Six modes with Graupner MX-16

[Colin Bouriquet]

Maybe there is a better way to do, but this one works fine...

I'm using channel 8 of the radio and the following switches : SW8 (2 positions) and CTRL9 (3 positions)

In the main menu, navigate to “controller settings”

Go to channel 8 and activate the CTRL19 (3-pos switch) as shown here :

Then adjust the following values (+32% and +32%) :

Now back to the main menu, choose “Free mixer” and set the following values (i'm using the third mix in this example you can choose M1 if you want). First S => 8, then select the SW8 (2-pos switch) and then go to the arrow on the right to set the travel and offset.

Set travel and offset according to the following screen :

And that's it you're ready to go... I have the following values, which works fine.

Colin.

[Chris Anderson]

Excellent. Added to the manual here. 

[Colin Bouriquet]

Thanks Chris.

[Thomas Kramm]

Thanks a lot!!!!

[Alain]

Thanks a lot!

[Colin Bouriquet]

Sorry Michael for the late answer... I have no experience with Graupner telemetry and have never tried the SD card yet.

[Furet]

Work fine for me thanks a lot Colin.

I use 3 modes and with your post i have 6 modes now.

Thanks again

[Arthur W. Vieira]

I do confirm that this works with the MX-20 also. Thanks!!

[Captain Silver]

colin,

thx for this post. How can i creat the rest of the PWM pulse signals. Add more mixer? If yes, what are the settings for the additional mixer, thx!

[Carlo]

Hi,
I really liked your post about the six modes for the Graupner Mx-16.
I followed your guide but I can't get the last part about the frequency, periods and so on...
How can I check that? Where can i find it on the radio?
Thank you,
Carlo