At this point, the only way to get my plane flying with Ardupilot is to buy a different FTDI cable which may or may not work with my setup(I don’t have the programming skills to bypass the configuration utility and add waypoints directly into the code). I’m running Windows Vista on my laptop and have the latest Ardupilot board with the shield kit as shown below. I’ve also installed the latest code, configuration utility and the newest version of the Arduino IDE.
Before I invest any more… Continue
Wondering if anyone might have experienced a problem that I'm having. My ArduPilot has been working fine, but yesterday, the servo outputs suddenly quit working. After doing some troubleshooting, I think I've narrowed the problem down the the multiplexer (74ACT157). It gets power, and gets a proper signal from the failsafe, and I found a 50 Hz signal on the inputs. However, the outputs are always low, at 0V.
I've been using a 4-cell, 4.8V receiver battery to power my setup. When… Continue
After spending 3 hours waiting for web pages to load, VicaCopter 4 is finally available for download. If U ever succeeded in building your own VicaCopter, U still probably wouldn't know half of what she can do.
The idea with VicaCopter is to have a reference design that works but not to have you copy it exactly. It's mainly our own… Continue
I first started flying with Ardupilot before the configuration utility (CU) was created. At the field, I’d pull up the Arduino IDE on my lap top, make the changes I wanted in the code (waypoints, altitude, tuning parameters, etc.), upload to my Ardupilot, then fly. After seeing how the flight was affected, I’d go back to the IDE make another change and fly again.
Then the CU was created and it looked cool but, at the field, it just created another step to go through before flying. I now… Continue
I am looking for use google earth as ground station.
i have download this program.
it is easy to interface to any application:
GooPs can receive data from other applications via a TCP/IP socket. GooPs listens on port 51234 for messages containing NMEA data.
and another similar program:
it demostrates it is possible but
Where can… Continue
How do you win a Government Grant for something that is largely illegal in your country??
Helen Greiner's Droid Works Wins First Gov't Grant for Flying Bots
Helen Greiner's stealthy new start-up, The Droid Works, has said almost nothing about what they're up to, except that they're working in the field of UAVs (unmanned aerial vehicles.) So far, Greiner has been funding the Framingham-based company herself, so there aren't any VCs to blab about what they're working on. And… Continue
1.-The shipping system right now is a nightmare for everybody (including me). Finally i found a good solution that will let me ship overseas for less than 5 dlls (under 4 oz). Yes i will accept First Class Mail soon, YEAHHH!!! It will be ready in… Continue
Just got back from this years AUVSI Student UAS Competition. My team (Utah State University) took 1st place this year using a paparazzi based platform. We recorded the highest score in the history of the competition. It was a very fun event and my hats off to all those who put it on each year.
I decided that I wanted to graduate from a thermopile based autopilot to a full IMU based system and the UAV DevBoard looked like it was going to scratch my itch. In the end, I wound up with it on my Multiplex Twister, an elapor foam electric ducted fan rc aircraft. Here's what I've done -
One of my motivations starts with the fact that I have flown an FPV Telemaster with an Ardupilot quite succesfully but use it primarily as a failsafe. I did, however, test the waypoint system to… Continue