wayne garris's Discussions
Accelometre Problem
Replied Nov 13
kalman filter for idiots
Replied Oct 27
Wayne's UAX Blog
Solid oxide fuel cells
I listened to a lecture on this technology at the AUVSI Cascade chapter convention ,very cool or should I say hot . we are talking 1000 deg C. Here is the place to find out more .They say you can fly for up to 10 times longer then batteries.
New ground station
this new ground station makes kml files that a server like xampp can serve to google earth.
AP emulator
This will replay a log fill on the com of your choice. 9600 baud 8bit No parity no hardware controll just pick a port ,load a file , hit run and stop if you want . to resume just hit run
enjoy!
My CNC machine
A couple of years back i decided I would make my own CNC machine it took me a while and some trial and error and this is what i came up with . It can rapid at 90 IPM has 36in X,24in Y, and 5in Z.
The U.A.X. Auto pilot
The U.A.X. is an open source Auto pilot its features are
- Netburner Mod5213 CPU , 32bit , 63mips @ 66MHz, 32k ram 256k flash
- InvenSense IDG-300 dual axis gyro
- Lisy300AL z gyro
- anolog devices ADXL330 tri axis accelerometer
- freescale MP3H6115A 115kpa pressure sensor
- freescale MP3v5004G 4 kpa pressure sensor
- 4-d system uDRIVE micro sd card interface
- Sanav FV-M8 5hz gps module
- open source mux / fail safe
- source code
Wayne's World
Latest Activity
Profile Information
- About Me:
- i work for peak- aviation prototyping uav's
- Hometown:
- everett ,wa
wayne garris's Photos
wayne garris's Videos
-
Tube maiden 1
Added by wayne garris
-
DSCF6296
Added by wayne garris
-
DSCF6292
Added by wayne garris
Wayne garris's Blog
"tube" plane
greg w/tube
tube
tube in xflr5
if you look closely you c… Continue
Posted on October 15, 2009 at 9:23pm — 38 Comments
NW AUVSI con
Posted on September 20, 2009 at 10:31am — 5 Comments
Open airframe
Posted on September 17, 2009 at 11:06am — 19 Comments
netburner AP project : The UAX
netburner mod 5213 cpu
sparkfun 5dof
LN96 .5 watt wireless modem
eb-85a gps
Jordi's MUX
Kalman vid
more to come
Posted on December 10, 2008 at 10:00am — 10 Comments
How to pull a 50g turn at 300mph and not lose speed
this is a polar cord file of three different airfoils , SD6062 7.5%,RG15 7% and FX791217
operating with a 7.5 in cord at 300mph
the FX is the clear winner
Posted on June 13, 2008 at 10:00pm — 21 Comments
Comment Wall (6 comments)
- At 2:41pm on December 20, 2007,
Jeffrey Johnson said…
- Wayne, lets plan to fly together in Jan sometime up there in WA. We can get you started with Beta Software then.
RE: Your small platforms, do you have access to a Nokia NSeries device (N95 etc). If so, we can get you up and running with them, if not, I think these will turn out to be a better set of devices to work with insofar as Autopilots go than the WM devices that Chris currently works with. But we will also be porting our acquisition code to WM6 in the new year. You can check out the new Tilt device on ATT since it is the best device in this family at the moment. But we highly recommend the nokia devices, and would like to be able to implement an autopilot with them as well.
Stay in touch,
Jeff
- At 10:39am on April 24, 2008,
Josh Ferguson said… - Wayne,
I don't know if this is the most private way to post my e-mail address. I thought I'd leave it here instead of in the forum. Here's my e-mail address:
joshua.ferguson[at]fergusontechnologygroup[dot]com
Drop me a line and we'll discuss.
Josh
- At 4:30pm on May 8, 2008,
Skyler Associates, LLC said… - Hi Wayne. This is Scott Thompson from Skyler Associates, LLC. Things going well up there?
- At 5:17am on May 20, 2008,
Keith Shaw said… - Sorry, wrong Keith Shaw
- At 3:13pm on June 8, 2008,
Scott Williamson said…
- Wayne
I'm very impressed with the work you are doing here and interested in your C2 design as it looks very similar to what I'm toying around with. My plan was for a UAV based on that design for air potos primarily. I confess i just like the look as well. I have a ryobi 31cc converted ready to g and spectrum radio equipment. I was wondering if you had any drawing or palns that you'd be willing to hshare to help me get the proportions correct??
Scott in New Zealand
- At 4:02pm on August 25, 2009,
Dave_fr said… - Wow I've just looked at your page, there's lots to learn from you !
Thank you for looking at my posts and I'd be delighted to receive some help from you !
© 2009 Created by Chris Anderson
