"Terry,
The time that the winch servo use to invert rotation is very small, when we are conducting our model that 360 rotation is almost negligible, a majority of times its unnoticed in the video feed.
Check the video…"
jalves's Discussions
Fligth tests results with Ap/arduimu combo
Started this discussion. Last reply by jalves Jul 5, 2010. 8 Replies 0 Likes
Coarse movement of the servos when in Stabilize Mode
Started this discussion. Last reply by jalves Jul 2, 2010. 3 Replies 0 Likes
ArduIMU 1st firmware actualization problem
Started this discussion. Last reply by jalves Jun 16, 2010. 7 Replies 0 Likes
jalves's Page
Latest Activity
Terry commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"This is quite an interesting idea.. simple and useful..
To follow-on from <jalves> comment - has the option of adding a second antenna and switching to it so that the rotation time back onto target is reduced significantly ? Also is the reason…"
jalves commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"ideally, the AT should maintain the direction (what it does now, but have to improve the solution implemented).
BUT if the video is fuzzy, you are in the limits of the video link then you should do a quick 180degrees turn and return to home…"
Grips commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"I think that this is great work. My only concern is that the tracker is essentially dependent on the same signal as the video feed. What happens when you drop video when you are a long way out with a high gain antenna?"
jalves commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"New video of teh Alpha version in action:
http://www.youtube.com/watch?v=m5C7Hacw6K0"
Monroe Lee King Jr. commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"Just now having coffee! What's up? This looks interesting!"
Ahmed Mubarak commented on jalves's blog post Open Source Antenna Tracker - OpenDiyAT"i made a sun light tracker before but i think your work is the same idea except you measure signal power, isA i will try to download your work,understand it and see if i can help :)"
jalves posted a blog postOpen Source Antenna Tracker - OpenDiyAT
Hello to all, I used a part of the Ardupilot legacy software plus code from Melih Karakelle and from Dennis Frie and "build" around an Open DIY Antenna Tracker - OpenDiyAT.It needs only sentences from a gps receiver unit (gprmc and gpgga) and it sends the telemetry to the ground using the audio link of our video transmitter.It is now in a very reliable form, and it has still a good development base.With some work, we can increase the telemetry data to send to the ground base.I publish the code…See More
Jalves's Blog
Open Source Antenna Tracker - OpenDiyAT
Posted on June 3, 2012 at 6:30am 6 Comments 4 Likes
Hello to all,
I used a part of the Ardupilot legacy software plus code from Melih Karakelle and from Dennis Frie and "build" around an Open DIY Antenna Tracker - OpenDiyAT.
It needs only sentences from a gps receiver unit (gprmc and gpgga) and it sends the telemetry to the ground using the audio link of our video…
Continue ArduIMU/Ap test platform ready!!
Posted on June 24, 2010 at 3:30pm 5 Comments 0 Likes
Hello all,
Developers of this combined project, Thanks!
Ugly and dirty, the system is ready to roll tomorrow, the bench tests all went well, although I think that the elevator amplitude (gain) isn't enough when in stabilize, which probably will happen also with RTL mode.
More to come, tomorrow.…
Developers of this combined project, Thanks!
Ugly and dirty, the system is ready to roll tomorrow, the bench tests all went well, although I think that the elevator amplitude (gain) isn't enough when in stabilize, which probably will happen also with RTL mode.
More to come, tomorrow.…
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
DIYDrones - CNC Project
133 members
-
Andropilot Users Group
183 members
-
ArduCopter User Group
1299 members
-
Moderators
24 members
-
Melbourne
48 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
