Pradeep Singh's Discussions
Radio selection
1 Reply
Started this discussion. Last reply by Noth666 Aug 21.
Help for selecting MOTOR,ESC & BATTERY
6 Replies
Started this discussion. Last reply by wayne garris Aug 18.
Pradeep Singh's Page
Latest Activity
ArduPilot (in its fly-by-wire mode) does the same thing as the FMA CoPilot, but it's not cheaper and certainly not easier to use. If all you want is stabilization, get the original CoiPilot, which works fine and is a lot cheaper.
I'm also looking to get an FMA Co-Pilot for my FPV Easy Glider with Eagle Tree OSD.
Is there a less expensive alternative from DIY Drones? I noticed they sel XYZ sensors and thourght maybe they had their own solution for less! :-)
Well the 4 channel unit is out of the question simply because you would not have gain for the FMA and on/off for autopilot.
The 6 channel unit from hobbycity looks like it has channel 5 and 6 proportional with knobs, so this would work fine.
One of…
Can i use the following radio systems for the ardupilot&fma co-pilot based UAV?
1.)http://www.toysonics.com/wfly-4ch-trasnmitter-6ch-reciever-ft06b-72mhz-mode-2.html
2.)http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9042&Produc…
May I suggest you use motorcalc if you still have questions feel free to ask.
My EZ* setup, which many people use, is listed here. FYI If you want to save some money you could get away with a 30A ESC.
Nick
out runner mounting solution for EZstar here
http://www.rangevideo.com/index.php?main_page=product_info&cPath=7_53&products_id=168
It's very hard to integrate outrunners with the EasyStar. I'd go for an inrunner instead. There are load of threads online on how to upgrade EasyStars, including our own. Please start there.
multiplex easystar
Uh, what aircraft?
Hi guys ,
I'm making ardupilot based UAV (navigation) ,going to use FMA CO-PILOT for stabilization.
so, what should be the appropriate power setup(motor,esc,batteries) for the uav ?
What abt following:
1.) http://www.hobbycity.com/hobbycity/store/uh…
thnx guys.
Krzysztof,
Don't know of many R/C hobbyists who fly when it is raining or when there is sufficient fog to obscure visual line of sight.
Just a thought.
Regards,
TCIII
Any rain and fog is a major obstacle for using thermopile sensors.
Pradeep,
The FMA Co-Pilot is calibrated by pushing a button on the Co-Pilot to institue a XY sensor calibration in the environment of the RTL point so it does not matter about its location. However, I believe the calibration is not updated like the…
Is it correct tht the FMA CO-PILOT behaves differently in places with diff. temperature & terrain?
Will it work for India's temp. & terrain?
Profile Information
- Hometown:
- Lucknow
Comment Wall
- No comments yet!
© 2009 Created by Chris Anderson
