-
Noth666
- Male
- Overijssel
- Netherlands
- Share
- Blog Posts (2)
- Discussions (67)
- Photos (1)
- Photo Albums
- Videos
- Noth666's Apps (1)
Noth666's Discussions
Noth666's Page
Latest Activity
George, best bet is a matt-screen laptop with a cover blocking out the top and sides, imho it works quite well, but it seems harder and harder to find non-glossy screen laptops. Lenovo still makes them, don't know of others.
Glare screen cover exam…
Sure.. Thanks.. I will try and if it does not work , will shoot an email to you.
Regards
SID
What browser are you using?
We tested now with firefox and internet explorer, both worked fine. You did notice the captcha also?
But if you do not get it to work, just send an email to sales@phoenixflightsystems.com.
Regards
Jesse
the submit button on your website contact form is not working. Pls check.
Regards
SID
Profile Information
- About Me:
- still in the build process, .40 size nitro converted to brushless, gyro stabilization, pan-tilt + zoom cam bellymounted.
Noth666's Photos
Noth666's Blog
Interesting as UAV controller/OSD: TechFX Motion OSD (with IMU)
I have just recently gotten one of these from http://thesiliconhorizon.com/
And I was basically planning on using it as the hardware platform for my own integrated UAV controller.
The specs TechFX Motion OSD IMU:
* small 2"x2.5" size
* fast dsPIC 40 MIPS 80 Mhz MCU
* 3 axis accelerome… Continue
And I was basically planning on using it as the hardware platform for my own integrated UAV controller.
The specs TechFX Motion OSD IMU:
* small 2"x2.5" size
* fast dsPIC 40 MIPS 80 Mhz MCU
* 3 axis accelerome… Continue
Posted on February 10, 2009 at 10:00am — 3 Comments
Comment Wall (2 comments)
- At 6:35pm on November 21, 2009,
Rich Weaver said…
- So how is the TechFX Motion OSD IMU working out so far. Has most of the features I need, plus it has one of my favorite micros on it. Also I noticed you said you had some good Kalman algo's, info etc. I'm still struggling with Kalman's so I could use some good pointers here.
- At 5:53pm on November 23, 2009,
Rich Weaver said…
- Thanks for the update. I actually was thinking about using it for my work where I need an easy upfront status display (NTSC) for our development vehicle which uses CAN for instrumentation (dspic has two CAN i/f's). I also need an IMU. This board seemed to come close for all that. I also have dspic tools and am familiar with it. All bonus points going for me on this board.
© 2009 Created by Chris Anderson
