-
NS Rana
- Gurgaon
- India
- Share
- Blog Posts (4)
- Discussions (36)
- Photos
- Photo Albums
- Videos (8)
- NS Rana's Apps (1)
NS Rana's Discussions
NS Rana's Page
Latest Activity
NS Rana's Videos
NS Rana's Blog
UAV Dev. Borad 2 Shield For Additional IO's with Ben Levitt's Firmware
You can make it your self as photos are self explanatory.
… Continue
Posted on October 30, 2009 at 4:06am — 18 Comments
Graphic LCD Based Simple & Low Cost Digital Oscilloscope (Useful Handy Tool for RC Pilots)
This Digital oscilloscope is very useful handy tool for RC Pilots who needs to see the PPM Signal of their radio. It's very handy and you can keep it in your pocket and even carry in the field also.
18F2550 Based Simple Digital Oscilloscope - Video_1:
18F2550 Based Simple Digital Oscilloscope - Video_2:… Continue
Posted on October 21, 2009 at 9:00pm — 11 Comments
Return to Home Quadrocopter (UAVX), with Altitude & Position Hold
This is a quadrocopter primarily based on the UAVP hardware: http://www.uavp.ch
My UAVX - Quadrocopter:
Prof. GK Egan started to develop the new firmware for this hardware with much powerfull but pin compatible microcontroller PIC18F2620 in place of PIC16F876.… Continue
Posted on October 16, 2009 at 9:00pm — 6 Comments
Nitro Pusher Plane (Ultimate UAV Airframe)
I have recently tested the large payload carrying capacity of this Nitro Pusher Plane, during normal flights without any autopilot.
With existing setup, it can carry around1kg of additional weight and can fly nicely without crying. I have tested the mentioned payload carrying… Continue
Posted on October 8, 2009 at 5:30am — 64 Comments
Comment Wall (4 comments)
- At 11:55pm on August 5, 2009,
viky said… - great to see that peoples nearby r working on same stuff well im working with atmega328 board and quite successful in ground test now has to try on the air. For that i require xbees so i m waiting for that. r u working for uav's
- At 7:17am on October 11, 2009,
Vassilis said… - @Rana
I got my Paparazzi setup from ppzuav.com, there is also chebuzz.com in Europe. They both sell complete Paparazzi kits with all the hardware you need.
- At 11:06am on October 14, 2009,
William Premerlani said… - Hi Rana,
Thanks for being my friend. I really appreciate all that you have been doing.
Billu
- At 5:46pm on November 8, 2009,
William Premerlani said…
- Hi Rana,
I enjoyed your videos very much. Thank you for posting them.
I have not forgotten about your quadcopter. Since we will need to control 4 motors, we'll need to use Ben's firmware as a starting point.
Best regards,
Billu
© 2009 Created by Chris Anderson
