"And the wheels??????  So cool Jose!!  You can add a sound module with a throttleable  V10 ......yes you can ,:))))"

"Hello , I wonder if the i2c port of the mpu6000 will be available for external magnetometer . I have run into an installation that needs the compass far from the rest of the IMU (power leads) to avoid magnetic distortion. Nice green board!!!!  "

"What is the secuence then??? I think I had a "good" one in my mind  EPA 100 for both and then -50/-50 for the mix. This way you get two sets of Flight modes 1,3,6 or 2,3,4 switchable by D .Being 3 manual 1,6 are stabilize and FBW A…"

"Its a shame the software did not allow that ,it was very helpfull when using 4 channel receivers with 2 ailerons ,with a selfmix -100/-100 i disabled the channel 3 and then a 2nd aileron to channel 3 mix makes the magic.....   Try instead using…"

"Just forget aux2 switch at first. I don´t know the term in Aurorish :))) but you need what is called a self mix mix . Mix aux1 to aux1 50/-50% and use any 2 position switch (not a channel) to turn it on . When the mix is on the output of the…"

"Sure ,I don´t remember this one :)))))  "

"Ja,ja,ja.... curiosity almost killed the cat. The frame is not so tricky to made but one needs some experience with wrapping carbon or other fiber to reinforce the joints .If there is enough interest,we can design one based on helis ball joints and…"

"Great!!!"

"EEPROM management is more clear now :)))) http://code.google.com/p/ardupilot-mega/wiki/Datalogging  "

"Hi, are you trying a kind of FBW only control? if not, bigger vertical surfaces are the easier route.If not inertia related ,normally is a lateral surface CG problem . Being in a Lab surely you are trying something new but bear in mind that even…"

"I think 900 is illegal ,you should use 868Mhz ."

"I hope the answer is a big NO ....it´s a software revision not a hardware one and I think DIYDRONES has been always sensible to backwards compatibility."

"Mounting sensors in a a vibrating enviroment can be tricky if maximum performance is needed . In Mikado´s Vbar ,there is a vibe analyzer , it would be great to have it in APM ,especially for helis where a lot of devices in the drivetrain can…"

"Great, it means we can use now qgcs??? which build ,7.6???   Big thanks for the team."

"Ya, I was starting to doubt my sanity!  :-)  Should have done more research on Sparkfuns website. They have added a note on the shield board page now about this issue."