Moderator
Graham Dyer
  • Male
  • RPAS Pilot Instructor - Johannesburg. (ex-Safari Trails Guide)
  • South Africa
Share

Graham Dyer's Friends

  • Alban Monares
  • Paul Morgan
  • Gerhard Laubscher
  • ChavAnd
  • Yan Ma
  • Steve Stark
  • pma_
  • Mike
  • Edson Moura
  • David Pulvermacher
  • Spyros
  • Quadzimodo
  • Tyrell John
  • Riaan Vermeulen
  • Gabriel DeVault

Graham Dyer's Groups

Graham Dyer's Discussions

So how should someone be taught to operate an RPAS?

Started this discussion. Last reply by Graham Dyer Feb 21, 2016. 2 Replies

APM:Plane, odd warning sound - no messages?

Started this discussion. Last reply by Grant Morphett Aug 9, 2015. 18 Replies

APM 2.5 suddenly lost ability to connect via USB or Telem

Started this discussion. Last reply by Pavel Sorejs Feb 9, 2015. 1 Reply

 

Graham Dyer's Page

Latest Activity


Moderator
Graham Dyer replied to Jimmyscott's discussion how long this battery lasts in flight?
"How long is a piece of string? orHow much current are you drawing?"
Saturday

Moderator
Graham Dyer replied to Mira's discussion Skywalker x8 weaving during flight in AUTO mode
"Your RLL2SRV_I and PTCH2SRV_I seem quite low, is this after autotune? Way back I used RLL2SRV_P = 1.4 and RLL2SRV_I = 0.3 on an X8 I tested with. NAVL1_PERIOD was 20 and NAVL1_DAMPING 0.75 with max roll at 45° This was 60km of flight in…"
Saturday

Moderator
Graham Dyer replied to Rado Ino's discussion Voltage of battery going up and down all the time
"The voltage calculations and conversions within the APM code are fairly rudimentary. There is just a basic filter to smooth out the voltage number reported. The power modules are also notoriously inaccurate and as most of us are used to millivolt…"
Saturday

Moderator
Graham Dyer commented on Andrew Tridgell's blog post ArduPilot on the CL84 TiltWing VTOL
"Tridge, are front-motor-yaw tricopter layouts supported? I know there was a PX4 version but not sure if that's the same thing here."
Jan 27

Moderator
Graham Dyer replied to Greg's discussion Crash on maiden flight- need help
"While it won't help for this crash it may help to prevent future ones. I do this on all new builds: "On shortish grass/lawn, in an open area, in STABILIZE mode (NOT Loiter or PosHold): now carefully throttle up slowly so the multirotor is…"
Jan 23

Moderator
Graham Dyer replied to Teoria's discussion Altitude problem (fluctuating) and Bad AHRS
"As this is quite technical you may get more response posting it in the support forum: http://discuss.ardupilot.org/c/arduplane/plane-3-7"
Jan 23

Moderator
Graham Dyer replied to Thomasss's discussion Mission Planner 1.3.42 no Full Parameters List
"...and it doesn't show immediately, so after changing to Advanced click on one of the other tabs and then back to Config/Tuning for the full list to show."
Jan 23

Moderator
Graham Dyer replied to Jacob Sears's discussion Does anyone know how to do a twin-motor airplane setup?
"No "sync" required, a simple Y-lead will work fine. Just do your ESC calibration together or using the same Tx settings."
Jan 23

Moderator
Graham Dyer replied to Derek the Bandit's discussion X UAV Talon parameters
"A clue also might be that you said your TRIM_ARSPD_CM = 1600cm/s yet your plane is flying at 1100cm/s (11m/s) so that parameter is set at least 5m/s too fast."
Jan 2

Moderator
Graham Dyer replied to Derek the Bandit's discussion X UAV Talon parameters
"A log would help. Diving and speeding up is a symptom of the plane sensing it's going too slowly or it's altitude is wrong or possibly tuning. Incorrect airspeed sensor placement/setup can cause this as well as wrong speed parameters but…"
Jan 2

Moderator
Graham Dyer replied to Chris Hardwick's discussion Strange Vibration Issue
"As you've tried taking off the VTx extension the only thing I can think of is checking the prop tracking, often a cause of high Z vibs, a slightly bent shaft could also cause this. Run up the motors slowly and from the side watch for the tips…"
Dec 21, 2016

Moderator
Graham Dyer replied to Brian Buckmaster's discussion Large Voltage Drop After Takeoff
"@Brian, a couple points: - LiPo's are 3.7V nominal and fully charged at 4.2V per cell. I don't know where 4.1V mentioned comes from but unless you're charging in very low temperatures, all LiPo chargers charge to 4.2 per cell by…"
Dec 21, 2016

Moderator
Graham Dyer commented on Nick Arsov's blog post AUAV-X1 , a new vision of the PX4 autopilot
"Bump, anyone know how to connect an analog airspeed sensor to the X1?"
Dec 19, 2016

Moderator
Graham Dyer commented on Nick Arsov's blog post AUAV-X2 ( the revised version of X1 ) is alive
"External LED and compass on the same I2C1 port (ie in parallel)?"
Dec 13, 2016

Moderator
Graham Dyer replied to GLENN ALEX's discussion Christmas OFFER DJI Mavic PRO FLY MORE COMBO w/ Remote, 3 Batteries, 64gb MicroSD, Charging Hub, Power Bank Adapter 999usd in the group South African DIY Drones User Group
"Caveat emptor. How much for shipping to Africa?"
Dec 12, 2016

Moderator
Graham Dyer commented on Chris Anderson's blog post New RTF VTOL plane from Horizon
"This configuration is already supported by Arduplane, although documentation is scarce and there are only a few using it. There's a thread here: http://discuss.ardupilot.org/t/tiltrotor-support-for-plane/8805/78 Using only 2 motors has a lot of…"
Dec 11, 2016

Profile Information

About Me:
I worked as a Safari Trails Guide (Lead Rifle) and Ranger in the South African Wildlife Tourism Industry for about 20 years.

Now I'm a qualified RPAS/Drone Pilot Instructor working for a drone school. Previously did lots of BVLOS flying, mostly nighttime. 340 hours logged and 16428km as of end Mar '16.

Did 116km total distance in one flight in 2014, as well as 02h17m duration with a 3kg electric plane.
Please tell us a bit about your UAV interest
Personal:

DIY Carbon H-frame QuadCopter with 250+ flights, APM2, 3DR Telemetry, Sunnysky X2212-980 motors, 11x4.7 carbon props, 2200/5000mAh 3S Turnigy Batts, 15 minute flight time, Sony 520TVL camera, 1.2GHz 700mW Video Transmittor + inverted Vee antenna, Video goggles & 9" Dvd monitor.

DIY FPV folding carbon Tricopter - XUAV-X2 (AUAV.CO) powered (300mm width, 3DR Telemetry, Sunnysky X2212-980 motors, 10x4.7 carbon props, 2200/5000mAh 3S batts

Twin boom FPV 1.75m plane for long distance Nav & FPV. APM2.6, 60+ flying hours.

Old: Own design & built twin-boom UAV Plane (R.I.P.)
ArduPilot v2.7.1, ArduIMU, MediaTek GPS. Had clocked 70+ hours flying time.

Slowstick - ArduPilot Legacy v2.6.2, APM2560 + Thermopiles, was used for FPV and as a stabilized trainer.
Hometown:
Randburg, Johannesburg, South Africa

Graham Dyer's Photos

Loading…
  • Add Photos
  • View All

Graham Dyer's Blog

RC Electric Calculator App for Android

Posted on September 3, 2015 at 12:54am 16 Comments

RC Electric Calculator App for Android - version 3.0 is coming out shortly with many improvements and some calculations…

Continue

Prop testing on a 'copter

Posted on April 18, 2014 at 9:43am 18 Comments

I wanted to do a few real world hover tests with different prop sizes to satisfy my curiosity.

I tested 3 sizes of some commonly used props, the RCTimer Carbon 10x4.7, 11x4.7 and 12x3.8, all carefully balanced. There are other very similar props branded differently.

The 'copter is a carbon…

Continue

ArduPilot formation flying revisited

Posted on April 14, 2014 at 11:29pm 14 Comments

Further to our first attempts at fully automated formation flying (see…

Continue

Another 100km+ flight

Posted on February 11, 2014 at 4:00am 25 Comments

Went for our long distance flight attempt today, flew a test flight with a 6S 2600mAh LiPo and then put in the 18650 batteries in, the log unfortunately shows both flights as I forgot to reconnect so I have calculated the time and total distance from the launch of the second flight to the…

Continue

Finwing Air Titan

Posted on February 6, 2014 at 11:30am 16 Comments

Looks like a good fpv/camera ship for long distance flights with…

Continue

Comment Wall (16 comments)

At 5:52am on July 24, 2009, Robert Hannaford said…
Hi Graham,

Please give me aring when you get a chance, Rob Hannaford 011 781 4029, 0733000337
At 5:43am on August 20, 2009, Vikram said…
have u got success in reversing ur aileron ... i m using same setup with XY sensors
At 2:12am on August 21, 2009, Vikram said…
i think i can correct it but want a clear view ur ailerons r reversed in automode or manual mode. If its auto change is to be done in the code else it has to be reversed using RC remote... let me know whats exactly it is
At 2:40am on August 21, 2009, Vikram said…
so u must have tried #define ROLL_REVERSE 1 , then nothing happened ... am i right..
At 3:08am on August 21, 2009, Vikram said…
actually the same problem i had faced but my elevator movement was reversed
in autopilot so i tried to correct it by #define PITCH_REVERSE
but nothing happened later i found thaT this header is not at all used inside code so i just follow the logic in code and got the line to reverse the motion of either aileron or elevator in ... void pulse_servos(int roll, int pitch) //Normal mode
{
pulse_servo_1(90+roll);
pulse_servo_2(90-pitch); //invert sign if you want to reverse the servo...
}

This is what i had changed then to work it well.
so
I did few tests and got semi success in few , hopefully i can make it this time atleast 80% success with little changes in trim as u recommended in ur blog failure and success.
Its very nice blog i will try to write the one ... it really helps ourselves and others
At 2:49am on August 24, 2009, Garth said…
Graham please contact me
021-7827148 or 0827708200

GARTH
At 4:41am on March 11, 2010, Cronselaar said…
Hi, this must sound stupid, but how do you get the nice line logs in GE... My current position just constantly changes. I'm using a E406. I can't seem to get the right altitude data in the GS2 either.. Any help would be appreciated.

Gerrit
At 9:58am on August 17, 2010, Robert Hannaford said…
Hi Graham, won't you please send me you cell no I have lost it, Regards Rob Hannaford

0733000337
At 8:08am on October 17, 2011, bruno voisin said…

Hi Graham, this is Bruno from Cape Town. 

These are my first steps in the UAV world, and I am interested in building a ArduCopter to conduct game counts in a nature reserve.  Any advice / recommendation would be most appreciated.

Thanks in advance,
Regards
bruno

At 1:31am on November 7, 2011, Robert Dielenberg said…

Hi Graham,

we're developing a UAV here in Newcastle, Australia. We've been experimenting with the ardupilot 2_7_1 for a few months. Having huge problems with altitude hold and throttle. We're using a petrol engine. We realize the original ardu is for electric. It seems there is not much data on petrol engines for ardu. We had a crash last week and lost the plane. We're going to rebuild the code from scratch and simplify it. Will get back on to you on our progress. Cheers,

 

Rob Dielenberg, MotMen UAV (www.motmen.com)

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service