"Thanks Rigel... after some investigation i found out that there is a -80dB RSSI threshold for the Xbee pro 900 that's why didn't see the number moving."
Bryan K's Discussions
Do Set Parameter
Started this discussion. Last reply by Doug Weibel Dec 19, 2011. 3 Replies 0 Likes
I am flying with Ardu Plane Version 2.4. I am attempting a specific mission, and I need to perform a change in my elevator trim parameter. I looked into using the do set parameter, and I saw in the…Continue
Differential Ailerons not working in ArduPlane v 2.26
Started this discussion. Last reply by Steve Gemmell Dec 3, 2011. 3 Replies 0 Likes
Just curious if anyone else is having this problem.I tried upgrading to Ardu Plane v2.26 and my differential ailerons are not working in stability, FBW or Auto modes. I still have manual control, but…Continue
Tags: 2.26, v, not working, Ailerons, Differential
Magnetometer on APM airplane
Started this discussion. Last reply by Chris Anderson Sep 27, 2011. 3 Replies 0 Likes
Question for the designers. Will APM (for airplanes) support a magnetometer any time soon? I understand that usually you don't need it because you can rely on the GPS, but I am interested in a…Continue
Tags: Magnetometer
Unable to communicate with airplane side xbee modem
Started this discussion. Last reply by Colin Bouriquet Feb 5, 2012. 20 Replies 0 Likes
I have been researching this all day and I cannot figure it out. I bought the Xbee kit from DIY Drones a few weeks ago, and the system worked great right off the bat, but now I am having problems…Continue
Bryan K's Page
Latest Activity
Rigel replied to Bryan K's discussion Unable to communicate with airplane side xbee modem"It probably won't change if you are stationary. Try moving one of your Xbees about 100ft away from the other and you should see changes. "
Colin Bouriquet replied to Bryan K's discussion Unable to communicate with airplane side xbee modem"When you tick the RSSI check box in the loopback test, is the number supposed to change to reflect the quality of the signal ? Mine always stays at -82 no matter what... is something wrong ? Thanks."
DeveloperDoug Weibel replied to Bryan K's discussion Do Set Parameter
"Micheal is correct. It is not a completed feature."
Bryan K replied to Bryan K's discussion Do Set Parameter"Thanks Michael, do you know of any plans in the future to enable this feature? If not, I guess I will just pursue it on my own."
DeveloperMichael Oborne replied to Bryan K's discussion Do Set Parameter
"i dont think the feature is enabled in the code."
Bryan K posted a discussionDo Set Parameter
I am flying with Ardu Plane Version 2.4. I am attempting a specific mission, and I need to perform a change in my elevator trim parameter. I looked into using the do set parameter, and I saw in the wiki that this is currently not being used Ardu Plane. Just curious if anyone has been able to use this feature, or if there is any intention by the developers of making this function available?See More
"Had the same issue as you, although at this stage I am only bench testing with a basic cardboard plane.
I use a tool called Grep http://www.wingrep.com (which originally came from Unix), to locate "aileron" inside the…"
Bryan K commented on Andrew Tridgell's blog post Inverted flight patch for APM"Andrew,
I have been trying to get inverted flight to work for quite some time now, with no luck. I think i finally figured out what the problem was. The inverted flight channel does not account for the pitch compensation parameter. I happen to have…"
Bryan K replied to Bryan K's discussion Differential Ailerons not working in ArduPlane v 2.26"Great catch, didn't even think to look. I am curious, were you just browsing through the code and found this, or was there somewhere on the website that tipped you off to these changes."
"Bryan,
The number for the program a differential Aileron channel has changed. The related code is now in RC_Channel_aux.cpp. THis whole area of code seems to have been significantly changes from 24-->26
You now need RC_CH5 =4…"
Bryan K posted a discussionDifferential Ailerons not working in ArduPlane v 2.26
Just curious if anyone else is having this problem.I tried upgrading to Ardu Plane v2.26 and my differential ailerons are not working in stability, FBW or Auto modes. I still have manual control, but if i flip to stability mode and roll the aircraft, only the aileron on channel 1 will react. I have RC_CH5 = 1 in my configuration file. They worked no problem in 2.24.Anyone else notice this?See More
Bryan K commented on Doug Weibel's blog post Test flight using new Auto Flap feature"You had mentioned before that you may turn your attentions to flaperons here in the near future. Just curious if that was still a feature that you were planning on adding. Not to downplay what you have done so far (the auto flap feature looks really…"
Bryan K replied to Mike's discussion Throttle pulsing?"When I was having the same problem, I tuned my proportional gain down to .25 and it did the trick. I didn't mess with the Integral or the Derivative gains."
Bryan K replied to Mike's discussion Throttle pulsing?"Let me know if that was the issue. I would be curious to see what the result is."
Bryan K replied to Mike's discussion Hard vs. soft waypoint altitudes?"I don't think it will help. I have had the same problem. In theory, if you don't use a CONDITION_CHANGE_ALT the plane should try to climb there as fast as possible to minimize the error between alt command and actual alt. I have tried the…"
Profile Information
- About Me:
- Grad Student
- Tell us a bit about your UAV interest
- Working for AE department head at university to see if Arduino and Ardu are the right fit for incorporating Auto Pilots into senior design.
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
Agricultural UAVs
135 members
-
Japan ArduCopter Group
51 members
-
Documentation Editors
51 members
-
ArduRover User Group
185 members
-
Moderators
24 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
