"There seems to be some bug on the forum going on.
It should be enough if you attach the route export or mission export and send it to firstname.lastname@example.org.
Please see here how to export route/mission: https://www.ugcs.com/en/page/support"
Thanks for your effort to analyze the photogrammetry results!
We would be thankful if you could send us your route or mission file to investigate and improve the functionality.
Please send them to email@example.com.
Also the new UgCS for…"
"Yes, the time lapse and focusing from DJI GO and then switching to UgCS to fly should work. It would be really interesting if that solved your issue, we will had to add Time Lapse to our app :)
"We are glad that you enjoy the new UgCS for DJI App version! Thanks for the feedback!
I have just tested the following scenario on Inspire 1 with Zenmuse X3:
Set manual camera settings
Turn off remote controller
Turn off the aircraft and remove…"
We appreciate your analysis, you have done great job!
Please do understand, that there is a difference between triggering camera manually (using button in app) and the flight controller triggering camera during auto flight.
We are testing our PX4 support on Pixhawk boards and we have concluded that there are technical problems preventing camera triggering with current PX4 1.6 firmware and Pixhawk boards, which unfortunately, we cannot solve.
It is possible…"
The connection suggestion was more theoretical, but since we see interest in Solo support in UgCS we will re-consider supporting the drone.
I may only suggest to try to get correct udp localport and IP values on Solo section of this…"
The Inspire 1 and Matrice 600 support "Camera by time" actions. In order to use that for photogrammetry, please set the action like this:
There are some limitations trough - you need to make sure, that the calculated time…"
"Pablo, the properties file just sets the default emulator location - t.i. where it will be added if you add a new emulator vehicle to the vehicles list.
The emulator will automatically jump to the first waypoint of the route as soon as you…"
I personally have not tested Pixracer autopilots, but if you are using it with Arducopter firmware, there should be no issues connecting and flying it with UgCS!
Let us know about your success!
The latest information I have on Datalink Pro, is that DJI have not yet implemented full support for it in their SDK, meaning that they do not yet allow third parties to fully use it.
We will certainly support it, but not just yet. We will…"
Yes, the DJI N3 controller is supported, just in the current UgCS version it is detected as A3 (no worries in the upcoming versions we will fix that) and You are totally correct on the Lightbridge 2 connection.
Currently it is the…"
Please do understand that in place of <ip address of Solo> and <udp port on Solo> You need to place actual IP and Port that You use in MissionPlanner to connect to Your vehicle.
When editing the .conf file You can stop VSM…"
Since Kestrel support is available only for Pro and Enterprise versions, those versions also carry user manual for Kestrel.
You are right about the A3 manual, we will include information about this flight controller in the next releases.