Sensors & IMUs (82)
| Discussions | Replies | Latest Activity |
|---|---|---|
Has anybody achieved a COMPLETE roll levelling feedback loop using IMU?I am just curious. I have a strange impression that all IMU-based amateur systems have never left ground testing or passive logging phase. Started by Krzysztof Bosak |
38 |
Dec 1 Reply by Roy Brewer |
Problem with MPXV5004DP just purchased from storeConnected sensor on breadboard and with nothing connected to either port the 1 volt on the analog out pin floats around randomly about 200… Started by Carter Brock |
1 |
Nov 29 Reply by OlivierD. |
Interfacing 5V sensor with 3.3V uCI'm considering using the MPX4115 absolute pressure sensor for altitude, and the MPXV5004DP differential sensor for speed. These are both 5… Started by Faisal Shah |
12 |
Nov 25 Reply by jstoezel |
Replacing thermo sensorsHi guys, well i´ve been thinking about the replacement of my FMA thermo sensors by 2 axis gyro unit(with code implemented for noise filteri… Started by Gil |
5 |
Nov 22 Reply by OlivierD. |
SCXL004DN Differential pressure sensor (0 to 4in H20)This is super expensive on DigiKey ($85), but it is being sold on electronic goldmine for cheap! $8.95!!) http://www.goldmine-elec-products… Started by Faisal Shah |
2 |
Nov 21 Reply by Doug Weibel |
Cold Weather UAV SensorsHello, I have been looking at various autopilots to add to my collection but I have one less common issue. I fly all winter and its not unu… Started by Curt Filipowski |
24 |
Nov 20 Reply by Curt Filipowski |
Outside Air TemperaturesI am trying to find a temperature sensor to put on my UAV to find out the temperature of the air surrounding the UAV. I am doing a project… Started by Beau Guidry |
0 | Nov 19 |
Accelerometer question for IMU ExpertsI just realized I should have posted my question here, instead of on the blog page. I'm not sure of the forum etiquette, so I'll just post… Started by Roy Brewer |
14 |
Nov 13 Reply by Roy Brewer |
Height Calculation for a jump.I have a +/- 5g 3d Acclerometer and a 3d gyroscope. I am looking into to calculate the maximum height attained while jumping. I need sugge… Started by Rameez Khan |
19 |
Nov 11 Reply by brakar |
Best setup and pinout for 6-DOF IMUHi all, I am designing a small 6-DOF IMU with digital outputs that uses the newest MEMs devices on the market (some of which haven't been… Started by Caleb Chamberlain |
50 |
Nov 1 Reply by Caleb Chamberlain |
© 2009 Created by Chris Anderson
