Quad/multicopter frames (21)
| Discussions | Replies | Latest Activity |
|---|---|---|
 Light and strong Aluminium quadframe.Hello what size , shaped and thickness of aluminum tubes can make strong and light quadcopter frame.I am using hxt dt750 motors with 11*… Started by anamr |
1 |
May 4 Reply by Jordan |
 Scratch built OCTO Copter + 3 axis camera Gimbalhello folks, i have designed my own OCTO copter (1meter in diameter) + 3 axis camera gimbal from scratch + hard case for the Ardumega and… Started by Mounir Zoorob |
3 |
May 4 Reply by Don Fiedler |
DJI Innovation F550 MeasurementsI am planning to buy a DJI F550 frame for my ardupilot, my home made frame is not as perfect and strong as I would like it to be and figure… Started by zdebeer |
4 |
Apr 29 Reply by zdebeer |
 Where to get a Multikopter frameI want to get a frame like the Cinastar. Octo 8 arm setup. Anyone know who make's them and sells them. Thanks Started by Greg Medve |
10 |
Feb 26 Reply by Maximus |
 Moderator MikroKopter octo XL frame with ArdupilotThe MK octo XL frame has diffent length arms like the picture below. The vertical and horizontal arms are longer than the diagonal. This ef… Started by Gareth Rens |
6 |
Feb 15 Reply by HangerRat |
 CNC questionHi, I'm thinking of getting a Fireball V90 (http://www.probotix.com/FireBall_v90_cnc_router_kit/ but open to other suggestions on the same… Started by Bart |
1 |
Feb 5 Reply by Russell - ScoutUAV.com |
 DIY CNCLittle bit off topic, any pointers for a good DIY CNC build would be highly appreciated. Specially to build/cut a quad frame or PCB.. Started by Ruwan |
0 | Jan 29 |
Power distributionI have been looking around for power distribution boards to run eight motors off at around 30 amps will this do the trick http://flyduino.… Started by joshua0clark |
2 |
Jan 24 Reply by joshua0clark |
PVC hexa frameHi all, After a huge delay with Arducopter things I have designed and assembled new crazy hexa frame using PVC water supply parts from loca… Started by Sanbernar |
6 |
Dec 30, 2011 Reply by Sanbernar |
open pilot and the DIY power dist boardHello, So I am stumped on how to bring the openpilot board together with the DIY drones power dist. board. The power dist. board has the 4… Started by Kevin Goodman |
2 |
Nov 20, 2011 Reply by Franco Nogarin |
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The third round was a reliablilty/aerial photography round for both planes and copters, which is now closed. Stay tuned for the next round, beginning soon.A list of all T3 contests is here.
Top Content
Groups
-
German Ardu-Group
32 members
-
UK Ardupilot Group
18 members
-
Learning to program the …
32 members
-
ArduCopter (traditional …
109 members
-
ArduCopter Italian Group
22 members
© 2012 Created by Chris Anderson.
