Autopilot hardware (118)
| Discussions | Replies | Latest Activity |
|---|---|---|
Shield board v2Does anybody know if the shield board V2 comes with the male and female pins. I do not need all the hardware that comes with the V2 shiel... Started by Antonio Watkins |
1 |
Nov 27 Reply by Thomas J Coyle III |
ARDUPILOT with GPRS (telif GM862)Hi guys, I got some ideas when checking the following link: http://tinkerlog.com/2009/05/15/interfacing-arduino-with-a-telit-gm862/ Chr... Started by Raven47 |
3 |
Nov 26 Reply by Raven47 |
u-Blox 6Anybody heard of this thing yet? It's listed on their website but not in their store. I sent an email, no reply yet. Supposed to be even ... Started by Jonathan Lussier |
7 |
Nov 25 Reply by Rich Weaver |
Yet ANOTHER AutopilotHi Guys. I'm new here so go easy eh! Inspired by THAT high altitude glider guy years ago Ive finally gone and designed a pcb. I didn'... Started by Vincent |
19 |
Nov 23 Reply by Morli |
5 Hz GPS....Accuracy?Just curious as to what positional accuracy can be expected from a 5 Hz GPS unit, such as the UBlox? How tight can you hold the deviation... Started by Jim Martin |
6 |
Nov 16 Reply by Jim Martin |
Getting re-aquainted with RC....what radio?Now that I'm getting up in years, and probably trying to relive my youth, I am venturing into the world of UAV's, and have been inspired ... Started by Jim Martin |
8 |
Nov 16 Reply by jasonshort |
How many switches/pushbuttons/LEDs to use, and for whatI'm putting together schematics for my YADIYA board (http://www.diydrones.com/forum/topics/yadiya-yet-another-diy), and I was wondering h... Started by Faisal Shah |
4 |
Nov 15 Reply by Vincent |
In Need of Some XBee Pro 900 StatsIf anyone has used/pushed their XBee Pro 900 (http://www.sparkfun.com/commerce/product_info.php?products_id=9087) to the limit I would lo... Started by Matt Fisher |
0 | Nov 11 |
Ardupilot XY sensor orientationI have been having a few problems with stability in my ardupilot setup and so i have been investigating the xy sensor setup. I was surpri... Started by Bill Noyce |
4 |
Nov 3 Reply by Bill Noyce |
YADIYA - Yet Another DIY Autopilot ProjectYet Another DIY Autopilot :) I've decided to go about making my own AutoPilot board from the ground up. Well, I won't exactly be startin... Started by Faisal Shah |
9 |
Nov 1 Reply by Andy Geppert |
© 2009 Created by Chris Anderson
