ArduPilot software version 2.2 (31)
| Discussions | Replies | Latest Activity |
|---|---|---|
question flightmode from ardu 2.2hello i have read that ardupilot can flight-mode RTL / OFF / autonom.flight in manual i read thats possible to fly by wire only with un... Started by olli |
5 |
Nov 14 Reply by olli |
ArduPilot Code Upload ErrorHi, I am getting the following error when attempting to upload the code. avrdude: stk500_getsync(): not in sync: resp=0x00 avrdude: stk5... Started by Ravi Rangan |
8 |
Sep 14 Reply by Dale |
Updated my Aircraft - 2.2.3 Code - Plane navigates now - but doesn't have enough throw to go left to make the waypoints.Jordi, any idea. I updated to a new engine, bigger prop today. I took off, turned AP on - she went to the 1st waypoint, but the plane had... Started by Peter Meister |
0 | Aug 18 |
Normal ground test behavior?Greetings, I'm running the latest beta code, and everything seem to be working on the mock-up, so I installed it in the Twinstar. The on... Started by 13brv3 |
11 |
Aug 14 Reply by 13brv3 |
Ardupilot will not navigatePlease help.My ardupilot does every thing it is supposed to do accept for one problem,it will not navigate.When I switch it into auto it ... Started by scott duffek |
3 |
Aug 12 Reply by 13brv3 |
Ardupilot 1x in a 2x code base?Hi, I've got a Corsair here that I use Co-Pilot II with, and I'd love to get it working so that Ardupilot did the nav but left the stabil... Started by Sam Hopkins |
0 | Aug 7 |
Ardupilot first flight - Easystar with Xbee and Telemetry - Having issue...Ok, so the first flight went well. Stabilization mode works great, tested that 2nd. NE Test perfect. Then I takeoff and switch to enable ... Started by Peter Meister |
39 |
Aug 7 Reply by Sam Hopkins |
WaypointHi there, I tested my Easystar yesterday at the local park, i was using the ardupilot 2.23 (latest) code, with the shield. I added the w... Started by Mikil P |
5 |
Aug 4 Reply by Paul Har |
Waypoint BehaviourHad 10 flights yesterday but no luck getting to WP's the model seems to be looking for the WP's.. but just gets further and further away.... Started by Paul Har |
6 |
Aug 3 Reply by Paul Har |
Ardupilot problem, led behaviourOk got all the bits together, programmed the ardupilot, no shield, uploaded successfully version 2.2.2 or 2.2.3 On reset Status LED flash... Started by Sarel P. Wagner |
28 |
Aug 2 Reply by Sarel P. Wagner |
© 2009 Created by Chris Anderson
