ArduPilot (190)
| Discussions | Replies | Latest Activity |
|---|---|---|
Ardupilot Shield V2 schematics?Hey all, just received the new Ardupilot Shield V2. Just looked around a bit on the site and didn't find any schematic of it. Will this ... Started by Rik Vlaming |
12 |
1 hour ago Reply by Chris Anderson |
ArduPilot Throttle ChannelHello All, Getting a setup going. Everything appears to be working well, except the throttle. Obviously, going straight into the Rx wor... Started by John C. |
27 |
10 hours ago Reply by Chris Anderson |
Some ******** Stole My 3.3v Pin.........Hi All, Been setting up another Ap today, applied another Locosys 200031 to the NEW shield....... (Some of you know i lost a UAV recentl... Started by Dr Mike Black |
6 |
10 hours ago Reply by Chris Anderson |
MUX v 16 problemI just flashed my tiny45 with v16 and it no longer works. I put back on v 15 and everything is ok, normal lights with the 3 positions of ... Started by Steve Westerfeld |
3 |
12 hours ago Reply by Steve Westerfeld |
ardupilot sofwarehi. I got battered but ardupilot schedule,,, I see that again in a hard yellow led flashes very fast, which after the old schedule, the y... Started by unomas |
3 |
1 day ago Reply by Chris Anderson |
Throttle Control on ardupilotHi all, Not sure if im the right place or if this information is somewhere else that i havnt seen yet....but? OK did all my testing on a... Started by Dr Mike Black |
46 |
1 day ago Reply by Dr Mike Black |
A Self-Learning UAV with the ArduPilot v2.4.4Hello ArduPilots, I have just released a new version (the v2.4.4) of my ArduPilot. This new version contains a very interesting feature:... Started by Jean-Louis Naudin |
5 |
1 day ago Reply by Jean-Louis Naudin |
Copilot 2 sensorsWill the Copilot II sensors work with the Ardu auto pilot. There are only 3 wires coming out of the main sensors instead of 4. Tony Started by Antonio Watkins |
1 |
Nov 12 Reply by Chris Anderson |
Eagle files for ArduPilot ShieldAre the eagle schematic and layout files available for the shield board? I wanted to get the footprint for the MPXV5004DP differential pr... Started by Faisal Shah |
0 | Nov 11 |
baud-rates qustionHey guys, my problem is that i use the ublox gps, and my Xbee's module max baud rate is 9600 (100mW version). I tried changing the code a... Started by endrew |
8 |
Nov 10 Reply by endrew |
© 2009 Created by Chris Anderson
